What do you need to build your own custom computer? Believe it or not, it's not as complicated as it seems. There are ten basic steps to building the perfect PC:
- Choose Your Processor First
- Then Choose The Motherboard
- Then Choose The Case & Power Supply
- Then Choose Your Components
- Prepare Your Workspace
- Then Assemble Your Computer
- Power On & Test
- Install The Operating System
- Install Updated Drivers
- Install Application Software
Choose The Processor Before The Motherboard
 The processor you choose usually determines which motherboard you select: Motherboards are designed to work with specific CPUs, indicated by the type of socket that the processor fits into. For example: Socket A, Socket 939, and Socket 940 are designed to work with Athlon processors, while Socket 478 and the new LGA socket 775 are for Intel CPUs. Many resellers offer bundles consisting of a processor, a motherboard, and memory; these can be a good way to save some money, and make the selection and compatibility process vastly easier.
Get the best processor & motherboard
you can afford!
The system chip set (the chips that pass data between the peripherals and the CPU) is the other component that differs among motherboards; it determines which integrated components (graphics, sound, Ethernet, etc.) will be included. Though integrated graphics aren't generally as good as dedicated cards, they're usually adequate for simple office tasks (home users will probably want separate Video Adaptors for game playing).
The Computer Case (Chassis):
 The variety of computer cases is staggering, with hundreds of styles, shapes and sizes available. We recommend that you look closely at the features. Some gorgeous PC cases are nightmares to work with, or are cheaply built.
Get the best case you can afford!
We recommend you ask for "tool-less" case design, which enables you to click > open, click > closed. Most cases and motherboards use the ATX form factor, standardizing the sizes of the components and all of the power connections. Speaking of power:
Choosing Your Computer Case
The right Computer Case can make working with your system a dream, but picking the wrong one will come back to haunt you. Though you can find a case plus power supply for less than $50, it is recommended that you invest a bit more to obtain a case that will last through many upgrades, has a high-quality power supply, and is attractive.
Case Form Factor:
Most cases and motherboards use the ATX form factor (a set of design standards that specify things such as the size of the motherboard and the connectors on the power supply). It's critical that your motherboard match the form factor of your case. Be aware of other standards are available (for example: Shuttle-style cube-shaped systems that come with their own custom motherboard). Check carefully and note the form factor when buying your case.
Case Construction:
Steel cases weigh more than aluminum ones, they cost less, and they muffle the noise from components such as hard drives better than aluminum cases do. On the other hand, aluminum boxes tend to be more stylish, and they are certainly easier to carry around.
Case Convenience:
Even the best-looking case will seem ugly if installing your components becomes a pain. Look for helpful features like a removable motherboard tray, tool-less drive carriers (where the hard drives are installed), and multiple fan locations for cooling the system (cooling can be one of the most critical features to ensure the long term health of your PC).
PC Case Included Power Supply:
Cheaper cases often come with cut-rate power supplies that may not be up to the task of powering a high-end PC. View our Guide To PC Power Supplies for more information. Some expensive cases don't come with a power supply at all, which lets you choose your own. If you've added a lot of new components to your PC, you may be overtaxing your existing power supply, so look at getting a bigger, better one. Power supplies can cause problems--including random crashes or even component failure--if they are asked to produce more power than they are designed to generate. Reputable manufacturers will typically include a chart of acceptable components.
Although many PC cases are sold with a pre-installed power supply, check it carefully - your power requirements may exceed the capacity of the pre-installed unit. How do you know? Here's a quick guide:
| Component | Wattage Required |
| Motherboard | 15-30 |
| Low-End CPU | 20-50 |
| Mid To High-End CPU | 40-100 |
| RAM | 7 per 128MB |
| PCI Add-In Card | 5 |
| Low To Mid-Range Graphics | 20-60 |
| High-End Graphics | 60-100 |
| IDE Hard Drive | 10-30 |
| Optical Drives | 10-25 |
You may need to purchase a higher-output power supply for your new PC. And remember the air flow, your power supply provides much of the system ventilation and cooling!
Memory: The More, The Better:
Boosting a PC's RAM is one of the most effective hardware enhancements possible. This 5-minute procedure can let you keep more programs open, accelerate memory-hungry graphics programs and games dramatically, and sharpen your PC's responsiveness.
Install A Minimum Of 2GB Of Memory
 The memory modules that most recent systems accept are 184-pin DDR2 DIMMs, DDR2 DUAL, and now DDR3 of varying speeds. The type you should buy depends on the motherboard and processor you choose: For best performance, choose the fastest type of memory module that works with both.
Getting Started
Once you've selected a case and power supply, be sure that you have the following items:
 A set of screwdrivers (small, large, slot, Phillips), or a PC Tool Kit- An anti-static wrist strap (is recommended in low humidity environments, but you are safer using one regardless)
- Needle-nosed pliers (great for pulling and installing jumpers)
- CPU (processor) or two
- CPU cooling fan(s) and heat sink(s)
- Sound Card
- Motherboard
- One or more hard drives
- Graphics card (or two CrossFire cards)
- One or more RAM DIMMs (Memory modules)
- An operating system
That's what you need to get started. Now you are ready to begin building your new PC!
These days, anyone can build or upgrade a computer. It's really very simple and it can save you hundreds of dollars.
With little more technical know-how than a typical upgrade requires, you can build a PC yourself from pre-selected compatible parts. Obviously, determining which parts to use is critical to successfully building the perfect PC. Therefore, it is recommended that you buy a complete kit, or seek the authoritative advice to help you choose, and get you started on the right track.
The following is a guide to the main components in a PC, including recommendations for each part (based on your intents and needs for your new system).
Building Your Own System
Assemble and stage your components carefully. You will be handling sensitive electronics that can be damaged if dropped, or misshandled.
Take Inventory:Before you start, take inventory of your parts. Don't begin your build when you if you don't have everything you need. Once you've determined you have everything you need, then begin!
Make Space, Make Time:
Building a PC take space - about a dining room table worth. So make sure you have plenty of working room and a few hours to proceed with minimal interruption.
Work on a flat, stable table top surface or bare floor, where you have room to layout all of the items.
Static Electricity Kills:
Please note: that carpeting is potentially dangerous to your computer, as a source for static electricity that can destroy components. Don't assemble your computer on the carpet! Use an inexpensive antistatic wrist strap (they are often priced at less than 6 bucks) is the perfect preventive measure if you have no alternative to working on carpet. Remember, a table top or bare floor is always the best place to build your system. Make sure you're wearing your antistatic wrist strap correctly (it does you no good at all if you don't wear it!), and you are ready to proceed.
Drivers Ready:
Assuming you have another internet connected PC, download the latest drivers from the vendors' Web sites for each component you'll be installing. Sometimes drivers are updated between the time the component was manufactured and the time you are installing it. It is always best to have the latest. Copy them to a CD for easy access.
Installing the Motherboard
Great care should be taken when installing the motherboard. First, take the board out of its packaging and put it on top of the antistatic bag it came in. Remember, you always want to safeguard your components from potentially hazardous static electricity (wear your strap).
- Inspect for defects
- Read the manual
- Install CPU & Memory
Before you secure the motherboard onto the PC case/chassis, inspect it carefully for any visible defects. Next, review the motherboard manual, to make sure you are familiar with the motherboard layout and which socket is which - the manuals are extremely helpful, usually easy to read, and include illustrations. Then, you can install the processor, heat sink and the memory modules on it.
CPU Install:
Use the unlocking mechanism to open the CPU socket - usually a lever. Carefully line up the pins and place the chip in its socket; it will fit only when oriented the proper way. An arrow or a missing pin on one corner of the chip will show you how to line things up. Lower the lever to lock the CPU into place.
 CPU Heat Sink:
Next, follow the manufacturer's directions to install the heat sink and the fan that will cool the processor. If you bought an OEM CPU and a separate heat sink, you may need to spread a thin layer of the thermal grease that came with the heat sink over the chip to ensure proper transfer of heat (some heat sinks come with this grease already applied). Attaching the clip that holds the heat sink in place may require a fair amount of force. Again, the instructions that came with the heat sink will show you how to fit it correctly. If you are in doubt, you can visit the manufacturer's website for more information. Plug the CPU fan's power connector into the proper connector on the motherboard.
Install Memory:
In order to install the memory modules, insert them into the proper sockets and push down firmly but evenly until the clips on both sides of the socket pop into place. If your motherboard supports dual-channel memory, consult the user manual to determine which pairs of RAM sockets you should use. The motherboard and the CPU are the brain and nerve center of your PC, so selecting these components is the most important decision you'll make.
Placing The Motherboard Into TheCase:
Some PC cases have a removable motherboard tray. If yours does, remove the screws holding it in place and pull it out of the case. Note the pattern of the holes in your motherboard, and screw brass standoffs into the motherboard tray or into the PC case in the correct locations (ALWAYS check the manual and follow their instructions to the letter). Check the layout of the sockets on the motherboard, and confirm that the ports on your motherboard's back panel match the holes on the Case's I/O shield that is installed in your case. If necessary, remove the old I/O shield by tapping it firmly a few times with the butt-end of a screwdriver, and then replace it with the shield that came with the new motherboard.
Carefully position the motherboard on top of the brass standoffs, line up all the holes, and use the screws that accompanied the case to fasten down the motherboard. If you are using a removable tray in your system, slide the tray and motherboard back into the case and then secure the tray.
Connecting The Power Supply
The Color-Coded Power Cables:
Making the proper connections is crucial to your successful PC system build. Fortunately, manufacturers now provide color-coded power cables and unique connector shapes to make the job easy.
First, plug the large ATX power connector for your power supply into the matching port on your motherboard. Next, locate the smaller, square processor power connector ( you can't miss it - it's the one sprouting the yellow and black wires) and attach it to the motherboard. Note: your connector is usually located near the processor. As always, refer to your motherboard manual for the exact locations. Use your motherboard user manual and find the description about front-panel connectors. Be forewarned - you're going to be doing work now that requires attention to detail and can be quite frustrating if you don't go into it with the right attitude. Attach each of the tiny leads from the power and reset switches, the hard-disk activity lights, the PC speaker, and any front-panel USB and FireWire ports to the corresponding pin on your motherboard. The needle-nose pliers are useful for manipulating small pieces.
Install the Video Card
 To install the video card, first remove the backplane cover for your AGP or PCI Express X16 slot (the metal piece where the monitor connector will emerge), install the graphics board in that slot, and then secure the card with a screw. Some graphics boards require a dedicated connection to your PC's power supply. If yours does, you should plug in the correct power connector now. Some video cards allow the insertion of a second video card connected to the first (see CrossFire) - if you purchased such a configuration, install and connect the second video card. Buy The Best Video Card You Can Afford! Make sure you get the features you want:
Most graphics boards today let you connect a second display to your PC. If you'd like to use your PC to record TV, a board with an integrated TV tuner is a good choice. Although USB based TV tuners are also an easy upgrade.
PCI Express:
This is the next generation of video display. The latest graphics cards now use PCI Express, an improved version of the AGP slot on most PCs. The actual performance boost you can expect depends on your application.
Gamers Don't Skimp On The Video Card
An integrated graphics processor (GPU) is vital to fast game performance and the most realistic visual experience. Dual Video Card solutions provide even more performance.
Connecting Keyboard & Mouse
Connect a keyboard, mouse, monitor, and power cable to your computer and turn it on.
If the internal fans begin to whir, the system beeps, and you see the machine starting to boot, power down (by holding the power button for 5 seconds) and continue building. If nothing happens, back up a step and recheck all of your connections. Make sure that both the processor and the memory are properly seated, and recheck those minuscule leads connecting the motherboard to the power and reset switches.
If it performs as expected, shut down your PC, unplug it, and open the case.
Installing The Drives
 Now it's time to install your drives. It's an easy process, but again requires attention to detail.
Make any necessary changes to jumpers on the drives before mounting them in the case. A two-drive system (one or two SATA hard drives, plus one parallel ATA optical drive, for example) is easy to set up; the SATA drives are jumper less, and the optical drive can be set as master on its own parallel ATA channel. Many cases have removable drive rails or cages to house drives. Use the included screws to attach your drives to the rails or cage, and slide them into the case. For externally accessible drives such as a DVD recorder, you can save time by installing one drive rail and sliding the drive in for a test fitting to make sure that its front is flush with the case.
The flat, wide ribbon cables that Parallel ATA drives use to carry data can restrict airflow inside your case, robbing your system of valuable cooling; and functionality aside. Rounded data cables available at your local PC store look much nicer, and they don't impede airflow.
Some drives ship with both the older connector and the SATA power connector. In that case, use one power connector or the other, but not both. The capacity of hard drives continues to increase: You can now hold over 1TB (Terabyte or 1,000GB) of data on a single drive. But though you don't have to compromise on the drive's size, you still have a few choices to make when picking a hard disks.
Important Note: OEM hard drives do not always include cables, software, or hardware (screws, brackets, etc.). Mounting hardware may be required, but this usually comes with barebones kits. Data Safety - Choose RAID:
RAID, which stands for Redundant Array of Independent Disks, lets you use multiple hard drives to boost disk speed or to keep a mirrored backup of your data in case a drive fails. Either setup requires multiple identical drives, and configuring them calls for a slightly complex configuration. An increasing number of systems use a configuration called RAID 0, which can significantly increase system speeds for data reading and writing. To configure your drives for RAID 0, first select a pair of drives that match the storage capacity you want. With 160GB hard drives available for under $90 and with RAID support included on most new motherboards, RAID can be a great value.
Serial ATA:
Most motherboards now include SATA support, and going with an SATA drive will make your system easier to set up and your drive simpler to move to a future PC when the time comes.
CD And DVD:
When build a new PC, adding a fast optical drive can increase its flexibility. And even if you're on a budget, drives that read and burn any format are now inexpensive.
Get An "All-In-One" DVD Burner Drive!
 With an all in one drive, there is nNo need to worry about whether your drive supports DVD+RW or DVD-RW. Such drives are now inexpensive, and writes to all major formats of rewritable DVD and CD.
Even no-longer-top-of-the-line 18X DVD burners can write an entire disc in a few minutes, and CD burning speeds are now amazingly fast. Consequently, if you're on a budget, there's no reason to pay a premium for a 12X or 16X DVD burner or to insist on buying the fastest CD-RW drive you can find.
Most stand-alone DVD players can play the dual-layer discs that these dual layer drives burn, boosting the amount of video or data that will fit on one disc. You may pay a small price premium for dual-layer drives, but the additional storage is well worth it.
Install The Add-In Cards
 For each add-in card, you must choose a free PCI slot - remove its backplane cover to allow access from the rear of the case, carefully position the card above the slot, and press down firmly to seat the card. Secure the card with a screw. Many motherboards have additional sound connectors or ports housed on small add-in boards. Some of these plug into slots on the motherboard; others screw into the back of the case in place of slot covers. Usually the additional ports are not essential to your PC's operation. For example, if you install a sound card, you do not need connectors to the motherboard's built-in sound chip. Check your motherboard manual to determine what each of these boards does.
Turn It On
Check your PC Set Up:
It's time to turn on your system and check your PC set up. Be sure the keyboard, mouse, and monitor are all plugged into the appropriate ports on the back of the PC. Plug the power cord back in, and turn the machine on.
When prompted, enter your PC's BIOS setup screen by pressing the indicated key (often Delete) as the machine boots. Menu options will vary from motherboard to motherboard, but they share the same general categories. Set the date and time, and then look for a setting that deals with PC health status and monitoring. That choice should bring up a screen showing processor and case temperature. Watch the processor temperature for a few minutes. It should stabilize at a level between 30°C and 50°C. If it keeps increasing, your heat sink probably isn't installed properly. Power down and check to see whether the heat sink is securely attached and making good contact with the processor. Next, find the section of the BIOS setup that determines the order in which your machine checks drives and devices for one it can boot from. Set CD-ROM to the highest priority so that your machine will boot from the Windows installation CD.
Before Installing Windows
You may be "cloning" a PC, and want to copy the same configuration. To do this you would use a "ghosting" tool to create an exact copy of the data from the first PC on the new one. Follow the instructions for the software to perform this operation. Some create the clone before the OS is installed, some afterwards.
Installing Windows
Installing the Operating System:
You are just a couple of steps away from using your new custom-built personal computer. Now you will install the operating system and then update your drivers, and install the programs.
First, place the Windows installation CD in your optical drive, reboot the PC, and allow the system to boot off the disc (assuming you setup the BIOS to boot from the CD/DVD). Windows setup should begin.
Early in the process, Windows may ask you whether you need to install a third-party SCSI or RAID driver. If you're using a RAID setup, press F6 when this message appears; then insert the disc containing the appropriate driver when it is requested.
Important Note: If your machine hangs while installing Windows, there may be a problem with one of the components. Try removing everything except the core components (motherboard, processor, one memory module, and hard drives); then, once you've successfully installed Windows, begin reinstalling each component one by one to isolate the source of the problem. Update Drivers
Once Windows is up and running, the last step in this process is to update your hardware drivers. This is not an optional procedure.Insert the CD with the latest drivers (downloaded from the web, or provided otherwise by the manufacturers) and install them, starting with those for the motherboard and graphics card and then moving on to less critical ones like mouse and sound card drivers. (Windows comes with basic drivers to get you up and running, but specific or updated drivers are vital.) Several reboots later, you should have a fully updated PC!
Network/Internet Setup
 Next, get your network & internet connection up and running - don't forget the security (a good Antivirus product, such as CA's is strongly recommended), install a firewall, and download the latest Windows patches. Finally, make sure that everything runs okay, and then back up your system. Also, save the hardware configuration under Windows. That way you'll have a clean, current image of Windows to go back to if serious trouble arises in the future.
Install Your Software
After installing the operating system, you will need to install the software you will be using, such as Microsoft Office, Adobe Photoshop, Corel Draw, and others. Some software will require registration or validation, so have the original discs with the software registration or license key ready. After installing the software, you may need to validate the software with the manufacturer or published via the web or by phone. Once this is all done, you are ready to use your new PC!
Your New PC Is Ready!
Having Problems?
Your motherboard, and components come with manuals that will help you diagnose problems, and provide technical support if you need it.
The first thing to do, is power off the computer, disconnect the power code, and check ALL connections. Then power on, and check your BIOS settings again!
If everything installs, and runs, but you are experiencing spontaneous reboots, your problem may be one of the following situations:
- Overclocking: We do not recommend overclocking.
- Memory Timing: Go into your BIOS and set your memory on "Auto" or at a more conservative setting and see if the reboot problem goes away.
- Outdated BIOS: Make sure you have the latest BIOS for your board. You can determine if your CPU is supported by browsing the BIOS updates of the motherboard manufacturer's website. Also check the latest BIOS version and updates.
- Inadequate Power: The power supply may be overstressed or failing due to heat or other malfunction.
- Ghosted/Cloned System: Or you've migrated (Ghosted) your OS and other files from one machine to another machine. You may have to perform a "repair install" to clean up Windows. Or you may have to perform a full install - realizing you will have your data, but will have to reinstall the application software as well.
|
March 04, 2011
